A running diary of the processes I went through when creating a metallic 3D plant to be integrated into 2 shots: an interior static shot, and an exterior moving shot. To see more work that I have created, please visit mikestruthers.com
Sunday, 14 December 2014
Conclusion
Over the course of this module, I have learned a great amount about integrating a CG object into a live action plate. From capturing the initial plate, to good modelling practice, to HDRI capture/manipulation, to shading, to lighting, rendering and finally compositing using a linear workflow. Overall, I am happy with the 2 images I was able to produce and ready to learn more about CG integration.
Exterior Shot
After applying similar techniques to the interior shot, I rendered out passes for the exterior shot and composited them together.
To create this shot, I copied the same render layers I used for the interior shot, then changed the lighting conditions from point lights, to a directional light.
Adding the background:
To add the background into the maya scene, I needed to track the scene first to get points in 3D place. I used Camera Tracker for this, making sure to apply the measurements I took from the location to apply to scale constraints.
The error rate was 0.60 which was very useful to create an accurate 3D scene. I then used a merge geo and write geo to write out both the point cloud data, and the camera data as FBX files, for use in maya.
I then imported the background image as an image plane, and the camera and point cloud data.
I then used the same render passes to create the scene. After testing the final gather settings (150) and unified sampling (1) numbers. I then rendered out the passes for compositing.
Here is a look at my node tree:
Following the same workflow as before was useful to get a good base. However I changed the shadow integration:
I shuffled the alpha from the shadow into the rgba channels, then used that as a mask in a colour correction node, attached the background. This meant that I could colour correct the shadow using the colour information from the background, giving a more realistic result. After applying a colour correction to both, adding grain, chromatic abberation etc. I was ready to export the finished sequence.
Tulip Petal Shader
Here is the last and final piece of shading for my model. To create the tulip petals, I downloaded a royalty free image of a petal
Then, I projected it onto the leaf mesh using a camera projection. Then I colour corrected the image using desaturate and adjusting the levels to get a bump channel. I wanted to create a metallic petal, but still include the complexity by using a leaf as well. So I created two shaders: a mia_xpasses shader with the flower texture as the color element, and a mia_xpasses shader with purple brushed metal material (using manipulated anisotropic reflections). I then used a layered shader and applied both shaders to them. I then separated the two with a black and white node, being output as an alpha and applied to the alpha channel in the layered shader.
Then, I projected it onto the leaf mesh using a camera projection. Then I colour corrected the image using desaturate and adjusting the levels to get a bump channel. I wanted to create a metallic petal, but still include the complexity by using a leaf as well. So I created two shaders: a mia_xpasses shader with the flower texture as the color element, and a mia_xpasses shader with purple brushed metal material (using manipulated anisotropic reflections). I then used a layered shader and applied both shaders to them. I then separated the two with a black and white node, being output as an alpha and applied to the alpha channel in the layered shader.
Reference Photos for Interior Shot
Interior Shot
After completing the rendering of all passes and compositing. Here is the finished image for the first shot:
Overall, I am happy with the outcome of the composite. I think the main strengths of the shot are the blur level and the colour correction in the scene. However I think the shadows are a little too dark for the scene.Here is breakdown of the multipass workflow:
![]() |
| Placing the lights and matching shadowing of matte ball photograph. |
![]() |
| Adding more lights to illuminate the object |
![]() |
| Testing IES lighting profiles for more realistic lighting |
![]() |
| Placing shadow geo/creating white bounce cards for Final Gather. |
When setting up the render passes I created Master Beauty (containing alpha, diffuse, specular, indirect, refraction and reflection passes), Ambient Occlusion (one for the floor, and one for the object for further control), Shadows (one for the shadows caught by the object, and one for the floor) and finally a colour matte (splitting the geometry into the red, green and blue channels. So I mapped the plant pot to the red channel, the top of the plant pot to the green channel, and the flowers to the blue channel). I rendered them all as individual targa files, which gave me control of having an alpha channel, as well as have separate parts to composite.
Here is the compositing workflow breakdown:
Tuesday, 2 December 2014
Shading + Integration
I have been working on more shading materials for my plant. In particular, I have been experimenting with layering multiple shaders together, as well as creating a brushed metal material with anisotropic reflections. Here is the grabs of today's work:To begin with, I focussed on shading of the 'sunflowers'. As a base for my shading network, I applied an mia_material_x_passes material to the petals, where I made it a metal material. I wanted to create a reflective gold type material, so I set my 0 degree value to 0.8


(in BRDF settings) then change the reflection colours to a more yellow/gold colour to represent the sunflower petals. To add further detail, I mapped a ramp to the top of the petals (using a simple planar projection) and added different shades of yellow and added a dirt image to give more ageing to the model. For the stem of the sunflower, I wanted to make the plant look more organic and resemble a real flower, so I wanted to reuse the material originally, used to create the pipe covers of the tulip flower, then merge this into a brushed metal. To create this, I mapped another ramp node using a sampler info node (cylindrical mapping). Originally, I used the sampler info node, however, it did not give the desired results I wanted. Following this, I then created the brushed metal by creating a very rough, non-glossy metal with anisotropic reflections. When I researched into brushed metal, I noticed that the surface detail runs perpendicular to the reflections, creating a distinguishing look.
In addition to shading, I have began integrating the object and added an mental ray light (area light), with the HDRI, Final gather map and background image mapped to a rayswitch node plugged into the render camera. In addition, I have set a ground plane to catch shadows. As far as shading goes, I am aound 85% complete. Then lighting and integration is the next step.
Subscribe to:
Posts (Atom)














